Solid Edge does not display threads because it is a CAD software primarily focused on creating accurate 3D models for engineering and design purposes. Displaying threads in a model can significantly increase the complexity of the model and may not be necessary for the intended use of the design. Additionally, threads are often represented using annotations or callouts in technical drawings rather than being modeled in detail. This helps to streamline the design process and improve performance when working with large assemblies. **

Yes, there are smartphones available in the market that do not have an edge display. These smartphones typically have a traditional flat screen design with bezels around the edges. Some users prefer smartphones without edge displays as they find them easier to hold and less prone to accidental touches on the sides of the screen. Examples of smartphones without edge displays include models from brands like Google, Sony, and LG. **

To sew leather edge to edge, you will need a leather needle, heavy-duty thread, and a leather sewing machine or a heavy-duty sewing machine with a leather sewing foot. First, align the edges of the leather pieces and secure them in place with clips or pins. Then, use a leather sewing machine or a heavy-duty sewing machine with a leather sewing foot to sew the edges together using a straight stitch. Make sure to use a longer stitch length and go slowly to ensure even stitching. Finally, backstitch at the beginning and end of the seam to secure the stitches. **

One can cut their finger on a steel edge by applying too much pressure while handling the steel object, causing the sharp edge to slice through the skin. Additionally, if the steel edge is not properly maintained and becomes dull, it can still cause injury by tearing the skin instead of cleanly cutting it. Accidentally brushing or bumping against a sharp steel edge can also result in a cut on the finger. **

The green color of the cut edge of normal window glass is due to the presence of iron impurities in the glass. When the glass is cut, the iron impurities are exposed to the air, causing them to oxidize and produce a green color. This phenomenon is known as "iron staining" and is a common occurrence in glass manufacturing. The green color is more noticeable in thicker pieces of glass, as there is more iron present to oxidize. **

The dimmer used can vary depending on the type of lighting fixture being controlled. Leading edge dimmers are typically used with incandescent and halogen bulbs, while trailing edge dimmers are more commonly used with LED and CFL bulbs. It is important to match the dimmer type with the appropriate lighting technology to ensure optimal performance and compatibility. **

To apply edge banding to a surface, you will need to first cut the edge banding to the desired length and width of the surface you are covering. Next, use a hot iron or edge banding machine to apply heat to the edge banding and press it firmly onto the surface. Use a roller or edge banding trimmer to ensure the edge banding is securely attached and trim any excess material. Finally, allow the edge banding to cool and set before using the surface. **

Trailing-edge dimmers are typically used for LED and electronic low-voltage lighting, as they provide a smoother dimming experience and help prevent flickering. On the other hand, leading-edge dimmers are more commonly used for incandescent and halogen lighting. The choice between leading-edge and trailing-edge dimmers depends on the type of lighting being used and the desired dimming performance. **